Rincon 2P Dyneema Half Insert

• Space for One Person-Comfortably sleeps one person
• Full U Shaped Zipper-The large door opening that runs close to the ground makes getting in and out easy.
• Quick Connect Setup-Quickly and easily connect the Insert to the Tent via sliding carabiners and a line-loc adjuster for fast and easy setup.
  
• Floating Bathtub Floor-The quick connect setup allows for the floor to "float", which creates a tighter pitch in slightly uneven terrain.

• Fabric-Dyneema CT3.5K.18 floor/15D mesh
• Weight- 15.8 oz
• Peak Height-54"
• Length-97"
• Width-40.5"
• Packed size-5"x11"

• Rincon 2P Dyneema Half Insert
• Stuff Sack

With the Rincon Tent already set up, connect the wiregate carabiners to the inside corners of one side of the Rincon Tent (the side without a stove jack). Once the corners are connected, with the door facing the center of the tent, connect the two remaining carabiners to the paracord on the doors. Open up the insert door and place the center pole inside the top cone on the half insert, and then connect the top cones of the insert and the tent inside of each other. Place the bottom of the pole on the circular shaped fabric reinforcement on the half insert. Once the pole is properly in place, close the zipper door and snug up the bathtub floor by pulling the paracord attached to the line-loc adjusters on the corners of the half insert.